OPA2613IDRG4 Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the Voltage Feedback type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 6V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 1mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 12mA, this op amp ic can operate. 95dB should remain the voltage gain. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 12V. For packing the buffer amplifier, the TR-axis is adopted.

OPA2613IDRG4 Features

8 Pins
supply voltage of 6V
95dB voltage gain

OPA2613IDRG4 Applications

There are a lot of Texas Instruments
OPA2613IDRG4 Instrumentational OP Amps applications.

• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection