OPA843IDG4 Overview

In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the Voltage Feedback-type. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations is approaching the 8 mark. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 1.2mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 20.2mA . There should be no change in the voltage gain. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of the buffer op amp is rated at 12V.

OPA843IDG4 Features

8 Pins
supply voltage of 5V
110dB voltage gain

OPA843IDG4 Applications

There are a lot of Texas Instruments OPA843IDG4 Instrumentational OP Amps applications.

• High-frequency data acquisition systems
• Laptop
• Precision measurement
• Biopotential
• Displayers for aircraft and air transportation control systems
• Television broadcasting equipment
• Automatic control
• PDA
• Communication
• E-book readers