SN65LVDS100DGK Overview

Power buffer is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.A total of Tube packages are available for shipping of power buffer.Surface Mount Universal mout for easy adaptation.This is one of the most common type of Buffer, ReDriver that can be found.The op amp buffer uses 3V~3.6V voltage to operate.It facilitates input from CML, LVDS, LVPECL sources.A temperature setting of -40°C~85°C should be set on the operating system to prevent malfunctions.With "65LVDS100," you will find more pin-to-pin solutions.There are 8 terminals on the op amp buffer.During reflow, it reaches a peak temperature of 260.Powered by 3.3V voltage, the splitter can be used to accomplish a wide variety of demanding tasks.There are 8 pins on the Power buffer, which corresponds to the pinout of the Power buffer.As far as output is concerned, it is in LVDS.Pins on its 8 axis are present.The Surface Mount on the board allows it to be mounted on PCBs or other boards.There are other Line Driver or Receivers's in the industry that play a significant role, like the power buffer.In order for this power buffer to operate, a voltage of 30mA must be applied.It is necessary to supply voltage 3.3V for normal operation.The repeter uses a 1-Bit receiver.In the most extreme case, this splitter dissipates 377mW watts.Splitters should be powered by 25mA-volts under normal conditions.An interface repeater signal with 1 elements.The spliter should be producing 12μA as its current output.

SN65LVDS100DGK Features

A standard Line Driver or Receivers.
1-Bit receiver.

SN65LVDS100DGK Applications

There are a lot of Texas Instruments SN65LVDS100DGK Signal Buffers, Repeaters, Splitters applications.

• Network Switches/Routers
• Test Equipment
• Add/Drop Muxes
• Communications Switchers
• Industrial/Embedded PC
• Medical
• PECL-to-LVDS Translation
• Industrial PCs
• SATA SSDs or HDDs
• Multidrop Buses