SN74ABT374ADW Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. D flip flop is embedded in the Tube package. There is a Tri-State, Non-Invertedoutput configured with it. JK flip flop uses Positive Edgeas the trigger. Surface Mountmounts this electrical part. A voltage of 4.5V~5.5Vis used as the supply voltage. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74ABT series. Its output frequency should not exceed 200MHz. A total of 1 elements are present. There is 250μA quiescent consumption. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74ABT374, you will find similar parts. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 3.5pFfarads. In terms of electronic devices, this device belongs to the ABTfamily of devices. This electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 8bits in its design. The superior flexibility is achieved through the use of 8 circuits. The D latch operates on 5V volts. This D flip flop is equipped with 0 ports. High efficiency requires the supply voltage to be maintained at 5V. With an output current of 64mA, this device offers maximum design flexibility. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.

SN74ABT374ADW Features

Tube package
74ABT series
20 pins
8 Bits
5V power supplies

SN74ABT374ADW Applications

There are a lot of Texas Instruments SN74ABT374ADW Flip Flops applications.

• Frequency Dividers
• Clock pulse
• Data Synchronizers
• Synchronous counter
• QML qualified product
• Single Down Count-Control Line
• Power down protection
• Frequency division
• Matched Rise and Fall
• Circuit Design