CD74HCT174M96 Overview

In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. Package Cut Tape (CT)embeds it. As configured, the output uses Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountis in the way of this electric part. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -55°C~125°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the 74HCT series. It should not exceed 25MHzin its output frequency. In total, there are 1 elements. Terminations are 16. The object belongs to the 74HCT174 family. Power is provided by a 5V supply. Its input capacitance is 10pFfarads. In this case, the D flip flop belongs to the HCTfamily. It is mounted by the way of Surface Mount. 16pins are included in its design. This device's clock edge trigger type is Positive Edge. It is included in FF/Latches. An electronic part designed with 6bits is used in this application. Due to its superior flexibility, it uses 7 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The power supply is 5V. For high efficiency, the supply voltage should be kept at 5V. It operates with 6 output lines. As a result, it consumes 8μA of quiescent current without being affected by external factors. Furthermore, it has DUMMY VALas a characteristic.

CD74HCT174M96 Features

Cut Tape (CT) package
74HCT series
16 pins
6 Bits
5V power supplies

CD74HCT174M96 Applications

There are a lot of Texas Instruments CD74HCT174M96 Flip Flops applications.

• Dynamic threshold performance
• Asynchronous counter
• Modulo – n – counter
• Data Synchronizers
• Registers
• Matched Rise and Fall
• Buffer registers
• Single Down Count-Control Line
• Common Clocks
• 2 – Bit synchronous counter