SN74LS112AN Overview

16-DIP (0.300, 7.62mm)is the packaging method. There is an embedded version in the package Tube. In the configuration, Differentialis used as the output. Negative Edgeis the trigger it is configured with. Through Holeis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 4.75V~5.25V volts. Currently, the operating temperature is 0°C~70°C TA. JK Typeis the type of this D latch. The 74LSseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 45MHz. This process consumes 6mA quiescents. A total of 16terminations have been recorded. This D latch belongs to the family of 74LS112. A voltage of 5V is used as the power supply for this D latch. An electronic device belonging to the family LScan be found here. The electronic part is mounted in the way of Through Hole. The 16pins are designed into the board. Its clock edge trigger type is Negative Edge. The part is included in FF/Latches. The D latch runs on a voltage of 5V volts. The supply voltage should be maintained at 5V for high efficiency. With an output current of 8mA, it is possible to design the device in any way you want. Currently, there are 5 lines of input. It is reported that there are 2 channels.

SN74LS112AN Features

Tube package
74LS series
16 pins
5V power supplies

SN74LS112AN Applications

There are a lot of Texas Instruments SN74LS112AN Flip Flops applications.

• Pattern generators
• Single Up Count-Control Line
• Latch-up performance
• Data Synchronizers
• Convert a momentary switch to a toggle switch
• Differential Individual
• Frequency Divider circuits
• Bounce elimination switch
• Storage Registers
• Matched Rise and Fall