SN74ABT533ADBR Overview

It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. This package has the format of Cut Tape (CT). The output it is configured with uses Tri-State. This electrical device has the logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It is -40°C~85°C at the operating temperature. 74ABT is the series number of this FPGA. With this electronic part, there are 8 bits. A device such as this has 20 terminations designed. As a member of the 74ABT533 family, it falls under that category. With the supply voltage set at 5V, it is able to operate. It has 20 pins that makes it easy to use. It is a member of the ABT family of electronic devices. This board has 20 pins on it, which is what it is designed for. It is mounted according to the Surface Mount method. In this device, there is a total of 2 ports available for use. This part is included in FF/Latches. 5.5V is the maximum voltage (Vsup) that can be supplied. There are 5V power supplies required for this machine to operate. A voltage greater than 4.5V must be supplied as a power supply (Vsup). The device's reliable performance makes it a good choice for TAPE AND REEL. Input lines are generated as binary equivalents by 3 output lines. Aquiescent current is consumed by 24mA without being affected by external forces. The circuit's superior flexibility is achieved through the use of 8 circuits.

SN74ABT533ADBR Features

20-SSOP (0.209, 5.30mm Width) package
74ABT series
8 Bits
74ABT533 family
20 pin count
20 pins
5V power supplies

SN74ABT533ADBR Applications

There are a lot of Texas Instruments SN74ABT533ADBR Latches applications.

• Data acquisition
• Counting
• Counter
• Relay
• Automotive Infotainment
• Accumulator Registers
• Instrumentation
• Watches
• Shift left register
• Automotive Cluster