SN74ABT534APWG4 Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. It is included in the package Tube. As configured, the output uses Tri-State, Inverted. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74ABTseries contain this type of chip. There should be no greater frequency than 175MHzon its output. A total of 1 elements are present. There is 250μA quiescent consumption. A total of 20terminations have been recorded. The 74ABT534 family contains it. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 3.5pF farads. An electronic device belonging to the family ABTcan be found here. Surface Mount mounts this electronic component. This board has 20 pins. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. Flip flops designed with 8bits are used in this part. 5.5Vis the maximum supply voltage (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. It operates from 5V power supplies. There are 2 ports embedded in the flip flops. As of now, there are 8input lines.
SN74ABT534APWG4 Features
Tube package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT534APWG4 Applications
There are a lot of Texas Instruments SN74ABT534APWG4 Flip Flops applications.
- Modulo – n – counter
- Digital electronics systems
- Reduced system switching noise
- ESD protection
- Consumer
- Asynchronous counter
- Circuit Design
- Computing
- Supports Live Insertion
- Shift registers
