SN74ABT574ADWR Overview

The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. D flip flop is included in the Cut Tape (CT)package. It is configured with Tri-State, Non-Invertedas an output. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis used in the operation. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74ABT series. You should not exceed 200MHzin its output frequency. The element count is 1 . As a result, it consumes 250μA quiescent current. There are 20 terminations,If you search by 74ABT574, you will find similar parts. It is powered by a voltage of 5V . Input capacitance of this device is 3.5pF farads. Electronic devices of this type belong to the ABTfamily. Electronic part Surface Mountis mounted in the way. 20pins are included in its design. This device's clock edge trigger type is Positive Edge. There is a base part number Bus Driver/Transceiverfor the RS flip flops. It is designed with a number of bits of 8. Its superior flexibility is attributed to its use of 8 circuits. Considering the reliability of this T flip flop, it is well suited for TR. It operates from 5V power supplies. The D flip flop is embedded with 2ports. If high efficiency is desired, the supply voltage should be kept at 5V. This T flip flop features a maximum design flexibility due to its output current of 64mA. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.

SN74ABT574ADWR Features

Cut Tape (CT) package
74ABT series
20 pins
8 Bits
5V power supplies

SN74ABT574ADWR Applications

There are a lot of Texas Instruments SN74ABT574ADWR Flip Flops applications.

• Frequency Divider circuits
• Differential Individual
• Digital electronics systems
• Single Up Count-Control Line
• Computing
• Count Modes
• Circuit Design
• Registers
• Reduced system switching noise
• Shift Registers