SN74ABT821ADWG4 Overview
It is packaged in the way of 24-SOIC (0.295, 7.50mm Width). The package Tubecontains it. As configured, the output uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74ABTseries of FPGAs. Its output frequency should not exceed 125MHz Hz. In total, it contains 1 elements. This process consumes 250μA quiescents. A total of 24 terminations have been made. The 74ABT821 family contains it. The D flip flop is powered by a voltage of 5V . This T flip flop has a capacitance of 3.5pF farads at the input. It is a member of the ABTfamily of D flip flop. There is an electronic component mounted in the way of Surface Mount. It is designed with 24 pins. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part designed with 10bits is used in this application. The system runs on a power supply of 5V watts. This flip flop has a total of 2ports. In order to ensure high efficiency, the supply voltage should remain at 5V. As a result of its output current of 64mA, it is very flexible in terms of design. The number of input lines is 10.
SN74ABT821ADWG4 Features
Tube package
74ABT series
24 pins
10 Bits
5V power supplies
SN74ABT821ADWG4 Applications
There are a lot of Texas Instruments SN74ABT821ADWG4 Flip Flops applications.
- Circuit Design
- Data transfer
- Buffered Clock
- Safety Clamp
- Automotive
- 2 – Bit synchronous counter
- Frequency Divider circuits
- QML qualified product
- Latch-up performance
- Storage Registers
