74VHCT374AMX Overview

It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). The package Tape & Reel (TR)contains it. Tri-State, Non-Invertedis the output configured for it. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. JK flip flop belongs to the 74VHCTseries of FPGAs. You should not exceed 130MHzin its output frequency. In total, it contains 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 74VHCT374. A voltage of 5V is used as the power supply for this D latch. A 4pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of AHCT/VHCT. This electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 8bits in its design. Using 8 circuits, it is highly flexible. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. An electrical current of 5V volts is applied to it. There are 2 ports embedded in the flip flops. The supply voltage should be maintained at 5V for high efficiency. There is 4μA quiescent current consumption by it.

74VHCT374AMX Features

Tape & Reel (TR) package
74VHCT series
20 pins
8 Bits
5V power supplies

74VHCT374AMX Applications

There are a lot of ON Semiconductor 74VHCT374AMX Flip Flops applications.

• Set-reset capability
• Patented noise
• Latch-up performance
• Matched Rise and Fall
• Bounce elimination switch
• Memory
• Individual Asynchronous Resets
• Synchronous counter
• 2 – Bit synchronous counter
• Frequency Dividers