SN74AC564DW Overview

20-SOIC (0.295, 7.50mm Width)is the packaging method. As part of the package Tube, it is embedded. Currently, the output is configured to use Tri-State, Inverted. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74AC series. Its output frequency should not exceed 95MHz. A total of 1elements are present in it. During its operation, it consumes 4μA quiescent energy. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74AC564family includes it. The power supply voltage is 3.3V. Its input capacitance is 4.5pFfarads. It is a member of the ACfamily of D flip flop. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part designed with 8bits is used in this application. 6Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. There are 2 ports embedded in the flip flops. This T flip flop features a maximum design flexibility due to its output current of 24mA. A total of 3input lines have been provided.

SN74AC564DW Features

Tube package
74AC series
20 pins
8 Bits

SN74AC564DW Applications

There are a lot of Texas Instruments SN74AC564DW Flip Flops applications.

• Parallel data storage
• Modulo – n – counter
• Data Synchronizers
• High Performance Logic for test systems
• Control circuits
• Digital electronics systems
• Balanced 24 mA output drivers
• Guaranteed simultaneous switching noise level
• Functionally equivalent to the MC10/100EL29
• Convert a momentary switch to a toggle switch