SN74AC564DWRE4 Overview

The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. T flip flop uses Tri-State, Invertedas its output configuration. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. The operating temperature is -40°C~85°C TA. This D latch has the type D-Type. FPGAs belonging to the 74ACseries contain this type of chip. You should not exceed 95MHzin the output frequency of the device. The element count is 1 . There is 4μA quiescent consumption. A total of 20terminations have been recorded. The 74AC564family includes it. A voltage of 3.3V provides power to the D latch. Input capacitance of this device is 4.5pF farads. Electronic devices of this type belong to the ACfamily. There is an electronic part that is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. In this case, the maximum supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be above 2V. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. A D flip flop with 2embedded ports is available. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. This input has 3lines in it.

SN74AC564DWRE4 Features

Tape & Reel (TR) package
74AC series
20 pins

SN74AC564DWRE4 Applications

There are a lot of Texas Instruments SN74AC564DWRE4 Flip Flops applications.

• Synchronous counter
• Balanced Propagation Delays
• Digital electronics systems
• Differential Individual
• ESD performance
• Computers
• Frequency Dividers
• Frequency division
• Storage Registers
• Counters