SN74AC564NSRE4 Overview
It is packaged in the way of 20-SOIC (0.209, 5.30mm Width). D flip flop is included in the Tape & Reel (TR)package. T flip flop is configured with an output of Tri-State, Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. A supply voltage of 2V~6V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. The FPGA belongs to the 74AC series. There should be no greater frequency than 95MHzon its output. A total of 1 elements are present. T flip flop consumes 4μA quiescent energy. A total of 20 terminations have been made. The 74AC564 family contains it. A voltage of 3.3V is used as the power supply for this D latch. JK flip flop input capacitance is 4.5pF farads. In terms of electronic devices, this device belongs to the ACfamily of devices. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Vsup reaches its maximum value at 6V. For normal operation, the supply voltage (Vsup) should be above 2V. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. There are 2 ports embedded in the flip flops. This input has 3lines.
SN74AC564NSRE4 Features
Tape & Reel (TR) package
74AC series
20 pins
SN74AC564NSRE4 Applications
There are a lot of Texas Instruments SN74AC564NSRE4 Flip Flops applications.
- Balanced Propagation Delays
- Memory
- Automotive
- Cold spare funcion
- Frequency Divider circuits
- Data Synchronizers
- Buffered Clock
- Asynchronous counter
- Event Detectors
- High Performance Logic for test systems
