SN74AC574NSRG4 Overview

The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). It is contained within the Tape & Reel (TR)package. The output it is configured with uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. It is operating at -40°C~85°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74AC series. It should not exceed 153MHzin terms of its output frequency. The element count is 1 . Despite external influences, it consumes 4μAof quiescent current. There are 20 terminations,JK flip flop belongs to 74AC574 family. The power supply voltage is 3.3V. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the ACfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. 20pins are included in its design. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device has the base part number FF/Latches. An electronic part designed with 8bits is used in this application. In this case, the maximum supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. The superior flexibility of this product is achieved by using 8 circuits. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. There are 3.3/5V power supplies attached to it. The flip flop has 2ports embedded within it. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. In addition, you can refer to the additinal BROADSIDE VERSION OF 374 of the D latch.

SN74AC574NSRG4 Features

Tape & Reel (TR) package
74AC series
20 pins
8 Bits
3.3/5V power supplies

SN74AC574NSRG4 Applications

There are a lot of Texas Instruments SN74AC574NSRG4 Flip Flops applications.

• Count Modes
• ATE
• Bus hold
• Differential Individual
• Guaranteed simultaneous switching noise level
• Storage registers
• Event Detectors
• Data storage
• Computers
• Dynamic threshold performance