SN74LVTH574PWE4 Overview

It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. The package Tubecontains it. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. A voltage of 2.7V~3.6Vis used as the supply voltage. In this case, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74LVTHseries of FPGAs. You should not exceed 150MHzin the output frequency of the device. In total, it contains 1 elements. As a result, it consumes 190μA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. It is a member of the 74LVTH574 family. An input voltage of 3.3Vpowers the D latch. Its input capacitance is 3pFfarads. LVTis the family of this D flip flop. There is an electronic component mounted in the way of Surface Mount. This board has 20 pins. This device has the clock edge trigger type of Positive Edge. The part is included in Bus Driver/Transceiver. The design is based on 8bits. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2.7V. The superior flexibility of this product is achieved by using 8 circuits. The flip flop has 2ports embedded within it. Optimal efficiency requires a supply voltage of 3.3V. As a result of its output current of 64mA, it is very flexible in terms of design. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.

SN74LVTH574PWE4 Features

Tube package
74LVTH series
20 pins
8 Bits

SN74LVTH574PWE4 Applications

There are a lot of Texas Instruments SN74LVTH574PWE4 Flip Flops applications.

• Load Control
• Dynamic threshold performance
• High Performance Logic for test systems
• ESD performance
• EMI reduction circuitry
• Synchronous counter
• Latch-up performance
• Pattern generators
• Modulo – n – counter
• Safety Clamp