SN74AHC16374DL Overview

In the form of 48-BSSOP (0.295, 7.50mm Width), it has been packaged. The Tubepackage contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 2V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74AHCseries FPGA. Its output frequency should not exceed 120MHz Hz. The list contains 2 elements. T flip flop consumes 4μA quiescent energy. A total of 48terminations have been recorded. This D latch belongs to the family of 74AHC16374. It is powered from a supply voltage of 3.3V. A JK flip flop with a 2.5pFfarad input capacitance is used here. Electronic devices of this type belong to the AHC/VHC/H/U/Vfamily. Surface Mount mounts this electronic component. It is designed with 48 pins. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. It is designed with 16bits. As soon as 5.5Vis reached, Vsup reaches its maximum value. For normal operation, the supply voltage (Vsup) should be above 2V. A D flip flop with 2embedded ports is available. With an output current of 8mA, this device offers maximum design flexibility. It operates with 3 output lines.

SN74AHC16374DL Features

Tube package
74AHC series
48 pins
16 Bits

SN74AHC16374DL Applications

There are a lot of Texas Instruments SN74AHC16374DL Flip Flops applications.

• Buffer registers
• Functionally equivalent to the MC10/100EL29
• 2 – Bit synchronous counter
• Computers
• Supports Live Insertion
• ATE
• Data transfer
• Memory
• Matched Rise and Fall
• Reduced system switching noise