SN74AHC174DGVRG4 Overview
In the form of 16-TFSOP (0.173, 4.40mm Width), it has been packaged. It is included in the package Tape & Reel (TR). It is configured with Non-Invertedas an output. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. Powered by a 2V~5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74AHCseries of FPGAs. Its output frequency should not exceed 180MHz Hz. A total of 1 elements are present. There is 4μA quiescent consumption. The number of terminations is 16. You can search similar parts based on 74AHC174. The power supply voltage is 3.3V. This T flip flop has a capacitance of 1.7pF farads at the input. Electronic devices of this type belong to the AHC/VHC/H/U/Vfamily. Electronic part Surface Mountis mounted in the way. It is designed with 16 pins. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. The design is based on 6bits. There is a 5.5Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 2/5.5V power supplies. With a current output of 8mA , it offers maximum design flexibility. There are 6 output lines in this JK flip flop.
SN74AHC174DGVRG4 Features
Tape & Reel (TR) package
74AHC series
16 pins
6 Bits
2/5.5V power supplies
SN74AHC174DGVRG4 Applications
There are a lot of Texas Instruments SN74AHC174DGVRG4 Flip Flops applications.
- Computers
- Common Clocks
- Frequency division
- Buffered Clock
- Differential Individual
- Shift Registers
- Latch
- Supports Live Insertion
- Asynchronous counter
- Digital electronics systems
