SN74AHC4066RGYR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 14-VFQFN Exposed Pad. A high level of reliability can be achieved through the use of an advanced packaging method Cut Tape (CT). Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 14. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. A total of 14 pins are injected into the electrical part body. A SPST - NO switching circuit is used for these analog switches. Look for analog switch ic variants by searching with 74AHC4066. Internally, this switch multiplexer has a resistance of 75Ohm. For functions related to 14 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. A cost-effective Single supply type analogue multiplexer. 2V is the lowest voltage that should be fed to the electronic electronic part. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 20μA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. In 50MHz-bandwidths, data can be transferred.

SN74AHC4066RGYR Features

4 Channels
Switch Circuit: SPST - NO
Bandwidth: 50MHz

SN74AHC4066RGYR Applications

There are a lot of Texas Instruments SN74AHC4066RGYR Analog Switches & Multiplexers ICs applications.

• Battery-powered systems
• Signal routing between systems
• 65 V DACs
• Remote Powered Equipment
• Wireless Local Loop
• Microprocessor controlled systems
• Voice over IP/DSL – Integrated Access Devices, Smart
• Multi-Line E1 Interface Cards
• Data switching
• Central office