SN74AHCT374N Overview

It is packaged in the way of 20-DIP (0.300, 7.62mm). It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Through Holemounts this electrical part. A 4.5V~5.5Vsupply voltage is required for it to operate. -40°C~85°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74AHCT series. Its output frequency should not exceed 130MHz Hz. In total, it contains 1 elements. During its operation, it consumes 4μA quiescent energy. It has been determined that there have been 20 terminations. The 74AHCT374 family contains this object. Power is supplied from a voltage of 5V volts. This T flip flop has a capacitance of 4pF farads at the input. Electronic devices of this type belong to the AHCT/VHCT/VTfamily. There is an electronic part mounted in the way of Through Hole. It is designed with 20 pins. Its clock edge trigger type is Positive Edge. This part is included in FF/Latches. This flip flop is designed with 8 Bits. In order to achieve its superior flexibility, 8 circuits are used. It operates from 5V power supplies. There are 2 ports embedded in the flip flops. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. Featuring the maximum design flexibility, it has an output current of 8mA . It has 3lines.

SN74AHCT374N Features

Tube package
74AHCT series
20 pins
8 Bits
5V power supplies

SN74AHCT374N Applications

There are a lot of Texas Instruments SN74AHCT374N Flip Flops applications.

• Buffer registers
• Cold spare funcion
• Supports Live Insertion
• Buffered Clock
• QML qualified product
• Data Synchronizers
• ESCC
• Modulo – n – counter
• Latch
• Storage registers