SN74ALS533ANSR Overview

The 20-SOIC (0.209, 5.30mm Width) package contains it. Tape & Reel (TR) is the packaging method. Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. During operation, the temperature is set at 0°C~70°C. The 74ALS series of FPGAs is the one this FPGA belongs to. Electronic parts with 8 bits are designed for this application. This device is designed with 20 terminations. The family in which it belongs to is 74ALS533. The device works with a voltage of 5V for its supply voltage. There are 20 pins attached to it. In terms of electronic devices, this one is in the ALS family. The 20 pins are designed into it. This electronic part is mounted in the way of Surface Mount. This device is equipped with 2 ports. There is a subcategory of FF/Latches for this part. The system is powered by 5V sources. There are electronic circuits attached to the 8 input lines. The device's reliable performance makes it a good choice for TR. The output current of 24mA makes it feature maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V.

SN74ALS533ANSR Features

20-SOIC (0.209, 5.30mm Width) package
74ALS series
8 Bits
74ALS533 family
20 pin count
20 pins
5V power supplies

SN74ALS533ANSR Applications

There are a lot of Texas Instruments SN74ALS533ANSR Latches applications.

• Lamp and Display (LED)
• Automatic test equipment
• Motor Drives
• Serial Output Register
• Parallel data storage
• Frequency dividing
• Hammer
• Meter applications
• Parallel-to-Serial Data Conversion
• Registers