SN74LV374AGQNR Overview
The package is in the form of 20-VFBGA. There is an embedded version in the package Cut Tape (CT). There is a Tri-State, Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. Powered by a 2V~5.5Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74LVseries contain this type of chip. You should not exceed 205MHzin its output frequency. In total, it contains 1 elements. During its operation, it consumes 20μA quiescent energy. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74LV374. Power is provided by a 2.5V supply. The input capacitance of this T flip flop is 2.9pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Electronic devices of this type belong to the LV/LV-A/LVX/Hfamily. A part of the electronic system is mounted in the way of Surface Mount. 20pins are included in its design. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. The flip flop is designed with 8bits. There is a 5.5Vmaximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Its flexibility is enhanced by 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. In order for the device to operate, it requires 3.3V power supplies. A total of 2ports are embedded in the D flip flop. As of now, there are 2input lines.
SN74LV374AGQNR Features
Cut Tape (CT) package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV374AGQNR Applications
There are a lot of Texas Instruments SN74LV374AGQNR Flip Flops applications.
- Pattern generators
- Reduced system switching noise
- Automotive
- Frequency Divider circuits
- Latch
- Dynamic threshold performance
- Storage Registers
- Buffer registers
- ESD protection
- Matched Rise and Fall
