SN74ALS575ADWRG4 Overview
24-SOIC (0.295, 7.50mm Width)is the packaging method. A package named Tape & Reel (TR)includes it. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of 0°C~70°C TAis considered to be the operating temperature. The type of this D latch is D-Type. The FPGA belongs to the 74ALS series. There should be no greater frequency than 30MHzon its output. In total, it contains 1 elements. This process consumes 17mA quiescents. 24terminations have occurred. You can search similar parts based on 74ALS575. A voltage of 5V is used to power it. A device of this type belongs to the family of ALS. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 24 pins. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. An electronic part with 8bits has been designed. 5.5Vis the maximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 4.5V. The system runs on a power supply of 5V watts. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. As of now, there are 8input lines. As an additional reference, you may refer to electronic flip flop WITH SYNCHRONOUS CLEAR.
SN74ALS575ADWRG4 Features
Tape & Reel (TR) package
74ALS series
24 pins
8 Bits
5V power supplies
SN74ALS575ADWRG4 Applications
There are a lot of Texas Instruments SN74ALS575ADWRG4 Flip Flops applications.
- Single Down Count-Control Line
- Shift Registers
- Single Up Count-Control Line
- ESCC
- ATE
- Patented noise
- Count Modes
- Communications
- Data transfer
- Balanced Propagation Delays
