SN74ALS576BNSR Overview

The package is in the form of 20-SOIC (0.209, 5.30mm Width). The package Tape & Reel (TR)contains it. Currently, the output is configured to use Tri-State, Inverted. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of 0°C~70°C TAis used in the operation. A flip flop of this type is classified as a D-Type. The 74ALSseries comprises this type of FPGA. Its output frequency should not exceed 30MHz. A total of 1elements are present in it. Despite external influences, it consumes 18mAof quiescent current. Currently, there are 20 terminations. This D latch belongs to the family of 74ALS576. A voltage of 5V is used to power it. A device of this type belongs to the family of ALS. It is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. The flip flop is designed with 8bits. The superior flexibility is achieved through the use of 8 circuits. This D flip flop is well suited for TR based on its reliable performance. It runs on 5Vvolts of power. This flip flop has a total of 2ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. Featuring the maximum design flexibility, it has an output current of 24mA . The number of input lines is 3.

SN74ALS576BNSR Features

Tape & Reel (TR) package
74ALS series
20 pins
8 Bits
5V power supplies

SN74ALS576BNSR Applications

There are a lot of Texas Instruments SN74ALS576BNSR Flip Flops applications.

• Bus hold
• Communications
• Functionally equivalent to the MC10/100EL29
• Safety Clamp
• Buffer registers
• Clock pulse
• Automotive
• Instrumentation
• EMI reduction circuitry
• Bounce elimination switch