SN74ALS876ADWRG4 Overview
As a result, it is packaged as 24-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. T flip flop uses Tri-State, Invertedas the output. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Temperature is set to 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74ALS series. In order for it to function properly, its output frequency should not exceed 30MHz. In total, it contains 2 elements. As a result, it consumes 21mA of quiescent current without being affected by external factors. The number of terminations is 24. The 74ALS876 family contains this object. It is powered by a voltage of 5V . Electronic devices of this type belong to the ALSfamily. In this case, the electronic component is mounted in the way of Surface Mount. A total of 24pins are provided on this board. There is a clock edge trigger type of Positive Edgeon this device. The part you are looking for is included in FF/Latches. An electronic part designed with 4bits is used in this application. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 5V power supplies are needed to run it. There are 2 ports embedded in the flip flops. With an output current of 24mA, this device offers maximum design flexibility. There are no output lines on the JK flip flop. WITH PRESETis also one of its characteristics.
SN74ALS876ADWRG4 Features
Tape & Reel (TR) package
74ALS series
24 pins
4 Bits
5V power supplies
SN74ALS876ADWRG4 Applications
There are a lot of Texas Instruments SN74ALS876ADWRG4 Flip Flops applications.
- Frequency Divider circuits
- Pattern generators
- Circuit Design
- ESD protection
- Single Down Count-Control Line
- Set-reset capability
- Guaranteed simultaneous switching noise level
- Memory
- Memory
- Single Up Count-Control Line
