74F794PC Overview

20-DIP (0.300, 7.62mm)is the packaging method. The Tubepackage contains it. It is configured with Tri-State, Non-Invertedas an output. It is configured with the trigger Positive Edge. Through Holeis in the way of this electric part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In this case, the operating temperature is 0°C~70°C TA. This D latch has the type D-Type. JK flip flop is a part of the 74Fseries of FPGAs. A frequency of 90MHzshould not be exceeded by its output. A total of 1 elements are present. As a result, it consumes 65mA quiescent current and is not affected by external forces. Currently, there are 20 terminations. Power is provided by a 5V supply. An electronic device belonging to the family F/FASTcan be found here. In this case, the maximum supply voltage (Vsup) reaches 5.5V. It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. WITH READ-BACKis also one of its characteristics.

74F794PC Features

Tube package
74F series

74F794PC Applications

There are a lot of Rochester Electronics, LLC 74F794PC Flip Flops applications.

• Frequency Dividers
• Control circuits
• Convert a momentary switch to a toggle switch
• Computers
• 2 – Bit synchronous counter
• Count Modes
• Automotive
• Power down protection
• Differential Individual
• Bus hold