SN74ALS990N Overview

The package in which it is embedded is named 20-DIP (0.300, 7.62mm). A package of Tube has been used. In its configuration, Tri-State is used as the output. D-Type Transparent Latch is the logic type of this electrical device. A Through Hole mount is used for mounting this electronic part. There is no supply voltage for this device. There is 0°C~70°C operating temperature. In the 74ALS series, this FPGA is located. It is designed with 8 bits. The family 74ALS990 includes it. 20 pins are used in its design. Through Hole is used to mount this electronic part. Electronic circuits comprise 8 input lines. The 24mA output current gives it maximum design flexibility. High efficiency requires a voltage supply of 5V. The binary equivalent of the input line is generated by 8 output lines. A total of 1 elements make up this object. Its superior flexibility is achieved by using 8 circuits. 24mA is set as the low level output current. -2.6mA is set as the high level output current. There should be a temperature below 70°C at which the system is operating. It is recommended that the operating temperature be higher than 0°C. It is capable of providing a maximum supply voltage of 5.5V. With a voltage of 4.5V, it operates at its minimum capacity.

SN74ALS990N Features

20-DIP (0.300, 7.62mm) package
74ALS series
8 Bits
74ALS990 family
20 pins
1 elements

SN74ALS990N Applications

There are a lot of Texas Instruments SN74ALS990N Latches applications.

• Counter timers
• Network Switches
• Shift left with parallel loading
• PCs and Notebooks
• Bus system register with enable parallel lines at bus side
• Registers
• Shift register
• Serial Input
• Control circuits
• Automotive Infotainment