SN74ALVCH162374DL Overview

The flip flop is packaged in 48-BSSOP (0.295, 7.50mm Width). The package Tubecontains it. T flip flop uses Tri-State, Non-Invertedas the output. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 1.65V~3.6V. In this case, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74ALVCH series. Its output frequency should not exceed 150MHz. A total of 2 elements are present. Despite external influences, it consumes 40μAof quiescent current. A total of 48terminations have been recorded. This D latch belongs to the family of 74ALVCH162374. A voltage of 1.8V is used as the power supply for this D latch. Its input capacitance is 3pF farads. The electronic device belongs to the ALVC/VCX/Afamily. There is an electronic part mounted in the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. This flip flop is designed with 16 Bits. For normal operation, the supply voltage (Vsup) should be kept above 1.65V. This flip flop has a total of 2ports. This T flip flop features a maximum design flexibility due to its output current of 12mA. In order for the chip to function, it has 3output lines.

SN74ALVCH162374DL Features

Tube package
74ALVCH series
48 pins
16 Bits

SN74ALVCH162374DL Applications

There are a lot of Texas Instruments SN74ALVCH162374DL Flip Flops applications.

• Dynamic threshold performance
• Reduced system switching noise
• Frequency Dividers
• Power down protection
• Data storage
• Memory
• Shift registers
• Synchronous counter
• Supports Live Insertion
• Count Modes