SN74HC273DBR Overview

The item is packaged in 20-SSOP (0.209, 5.30mm Width)cases. D flip flop is embedded in the Cut Tape (CT) package. As configured, the output uses Non-Inverted. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. Temperature is set to -40°C~85°C TA. This logic flip flop is classified as type D-Type. The 74HCseries comprises this type of FPGA. Its output frequency should not exceed 60MHz. The list contains 1 elements. There is a consumption of 8μAof quiescent energy. 20terminations have occurred. It is a member of the 74HC273 family. A voltage of 5V is used to power it. This T flip flop has a capacitance of 3pF farads at the input. An electronic device belonging to the family HC/UHcan be found here. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It is designed with 8bits. Vsup reaches its maximum value at 6V. Normal operation requires a supply voltage (Vsup) above 2V. Due to its superior flexibility, it uses 8 circuits. In view of its reliability, this D flip flop is a good fit for TR. High efficiency requires the supply voltage to be maintained at 5V. As a result of its output current of 5.2mA, it is very flexible in terms of design. Currently, there are 2 lines of input. Additionally, there are DUMMY VAL on the electronic flip flop that can be referred to.

SN74HC273DBR Features

Cut Tape (CT) package
74HC series
20 pins
8 Bits

SN74HC273DBR Applications

There are a lot of Texas Instruments SN74HC273DBR Flip Flops applications.

• Memory
• Data storage
• Frequency Divider circuits
• 2 – Bit synchronous counter
• Matched Rise and Fall
• Buffer registers
• Patented noise
• Count Modes
• Test & Measurement
• Communications