SN74AS175BDRE4 Overview
The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. T flip flop is configured with an output of Differential. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of 0°C~70°C TAis used in the operation. D-Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 74ASseries FPGA. A frequency of 100MHzshould not be exceeded by its output. A total of 1elements are present in it. During its operation, it consumes 34mA quiescent energy. Currently, there are 16 terminations. You can search similar parts based on 74AS175. Power is provided by a 5V supply. It is a member of the ASfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. Vsup reaches its maximum value at 5.5V. Its superior flexibility is attributed to its use of 7 circuits. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The system runs on a power supply of 5V watts. As a result of its output current of 20mA, it is very flexible in terms of design. There are 2 output lines in this JK flip flop. Currently, there are 3 input lines present.
SN74AS175BDRE4 Features
Tape & Reel (TR) package
74AS series
16 pins
5V power supplies
SN74AS175BDRE4 Applications
There are a lot of Texas Instruments SN74AS175BDRE4 Flip Flops applications.
- Communications
- Computing
- Reduced system switching noise
- Latch
- QML qualified product
- Circuit Design
- Bus hold
- Test & Measurement
- Shift registers
- Consumer
