SN74AUC1G79DCKRG4 Overview
5-TSSOP, SC-70-5, SOT-353is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. In the configuration, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at 0.8V~2.7Vvolts. In this case, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74AUC series. Its output frequency should not exceed 275MHz Hz. As a result, it consumes 10μA quiescent current and is not affected by external forces. There are 5 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74AUC1G79family includes it. A voltage of 1.2V is used to power it. The input capacitance of this JK flip flopis 2.5pF farads. Electronic devices of this type belong to the AUCfamily. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 5. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. There are 1bits in its design. There is a 2.7Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 0.8V for normal operation. The superior flexibility of this product is achieved by using 1 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. With an output current of 9mA, it is possible to design the device in any way you want.
SN74AUC1G79DCKRG4 Features
Tape & Reel (TR) package
74AUC series
5 pins
1 Bits
SN74AUC1G79DCKRG4 Applications
There are a lot of Texas Instruments SN74AUC1G79DCKRG4 Flip Flops applications.
- Counters
- Registers
- Power down protection
- Latch-up performance
- Patented noise
- Balanced Propagation Delays
- Convert a momentary switch to a toggle switch
- ESD performance
- Supports Live Insertion
- Asynchronous counter
