SN74AS374DWR Overview

As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tape & Reel (TR). In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis required for its operation. Temperature is set to 0°C~70°C TA. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74AS series. You should not exceed 125MHzin its output frequency. A total of 1elements are present in it. Despite external influences, it consumes 120mAof quiescent current. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74AS374 family contains this object. The power supply voltage is 5V. The electronic device belongs to the ASfamily. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. It has a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 4.5V. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The power supply is 5V. The flip flop contains 2ports. This T flip flop features a maximum design flexibility due to its output current of 48mA. 3input lines are available for you to choose from.

SN74AS374DWR Features

Tape & Reel (TR) package
74AS series
20 pins
5V power supplies

SN74AS374DWR Applications

There are a lot of Texas Instruments SN74AS374DWR Flip Flops applications.

• Data Synchronizers
• Count Modes
• Test & Measurement
• Memory
• Automotive
• Convert a momentary switch to a toggle switch
• Set-reset capability
• Frequency Dividers
• Power down protection
• Reduced system switching noise