SN74AS374N Overview

The flip flop is packaged in 20-DIP (0.300, 7.62mm). The Tubepackage contains it. It is configured with Tri-State, Non-Invertedas an output. There is a trigger configured with Positive Edge. It is mounted in the way of Through Hole. The JK flip flop operates at 4.5V~5.5Vvolts. The operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74AS series. A frequency of 125MHzshould not be exceeded by its output. There are 1 elements in it. As a result, it consumes 120mA of quiescent current without being affected by external factors. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 74AS374 family. A voltage of 5V is used to power it. In terms of electronic devices, this device belongs to the ASfamily of devices. Through Hole mounts this electronic component. This board is designed with 20pins on it. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. This flip flop is designed with 8 Bits. Due to its superior flexibility, it uses 8 circuits. An electrical current of 5V volts is applied to it. The flip flop has 2ports embedded within it. The supply voltage should be maintained at 5V for high efficiency. In addition to its maximum design flexibility, the output current of the T flip flop is 48mA. A total of 3input lines have been provided.

SN74AS374N Features

Tube package
74AS series
20 pins
8 Bits
5V power supplies

SN74AS374N Applications

There are a lot of Texas Instruments SN74AS374N Flip Flops applications.

• Frequency Divider circuits
• Counters
• Data transfer
• Registers
• Test & Measurement
• Bus hold
• Convert a momentary switch to a toggle switch
• Computers
• Divide a clock signal by 2 or 4
• Supports Live Insertion