The package is in the form of 20-SOIC (0.295, 7.50mm Width). The package Tape & Reel (TR)contains it. Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. 0°C~70°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. It belongs to the 74ASseries of FPGAs. Its output frequency should not exceed 125MHz. There are 1 elements in it. There is 150mA quiescent consumption. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74AS4374 family contains this object. Power is supplied from a voltage of 5V volts. Devices in the ASfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. There are 5V power supplies attached to it. There are 2 ports embedded in the flip flops. Optimal efficiency requires a supply voltage of 5V. As a result of its output current of 48mA, it is very flexible in terms of design. Currently, there are 3 lines of input. Furthermore, it has DUAL-RANK FLIP-FLOPas a characteristic.
SN74AS4374BDWR Features
Tape & Reel (TR) package 74AS series 20 pins 5V power supplies
SN74AS4374BDWR Applications
There are a lot of Texas Instruments SN74AS4374BDWR Flip Flops applications.