SN74AS576DWRE4 Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. This output is configured with Tri-State, Inverted. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In this case, the operating temperature is 0°C~70°C TA. This electronic flip flop is of type D-Type. It belongs to the 74ASseries of FPGAs. A frequency of 125MHzshould be the maximum output frequency. The element count is 1 . It consumes 125mA of quiescent A total of 20 terminations have been made. The 74AS576 family contains this object. Power is supplied from a voltage of 5V volts. An electronic device belonging to the family AScan be found here. Surface Mount mounts this electronic component. It is designed with 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. It reaches the maximum supply voltage (Vsup) at 5.5V. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The system runs on a power supply of 5V watts. The D flip flop is embedded with 2ports. It offers maximum design flexibility with its output current of 48mA. As of now, there are 3input lines.
SN74AS576DWRE4 Features
Tape & Reel (TR) package
74AS series
20 pins
5V power supplies
SN74AS576DWRE4 Applications
There are a lot of Texas Instruments SN74AS576DWRE4 Flip Flops applications.
- Frequency division
- Circuit Design
- Dynamic threshold performance
- Shift registers
- ATE
- Convert a momentary switch to a toggle switch
- Latch-up performance
- Data transfer
- Test & Measurement
- Buffered Clock
