SN74AS825ADWE4 Overview
The item is packaged in 24-SOIC (0.295, 7.50mm Width)cases. As part of the package Tube, it is embedded. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of 0°C~70°C TAis used in the operation. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74AS series. A total of 1elements are present in it. As a result, it consumes 73mA quiescent current. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the 74AS825 family. Power is provided by a 5V supply. In this case, the D flip flop belongs to the ASfamily. It is mounted by the way of Surface Mount. With its 24pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. A total of 5V power supplies are needed to run it. A total of 2ports are embedded in the D flip flop. In addition to its maximum design flexibility, the output current of the T flip flop is 48mA. Currently, there are 5 input lines present. Additionally, there are WITH TRIPLE OUTPUT ENABLE; WITH CLEAR AND CLOCK ENABLE on the electronic flip flop that can be referred to.
SN74AS825ADWE4 Features
Tube package
74AS series
24 pins
5V power supplies
SN74AS825ADWE4 Applications
There are a lot of Texas Instruments SN74AS825ADWE4 Flip Flops applications.
- Automotive
- Memory
- ATE
- Counters
- Reduced system switching noise
- ESCC
- Memory
- Buffer registers
- Communications
- Frequency Dividers
