SN74HC174PWRG4 Overview
It is embeded in 16-TSSOP (0.173, 4.40mm Width) case. It is included in the package Tape & Reel (TR). T flip flop uses Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. Surface Mountis in the way of this electric part. Powered by a 2V~6Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74HC series. A frequency of 50MHzshould not be exceeded by its output. D latch consists of 1 elements. It consumes 8μA of quiescent current without being affected by external factors. Terminations are 16. If you search by 74HC174, you will find similar parts. A voltage of 5V is used as the power supply for this D latch. A 3pFfarad input capacitance is provided by this T flip flop. In this case, the D flip flop belongs to the HC/UHfamily. This electronic part is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. 6bits are used in its design. In this case, the maximum supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be above 2V. This D flip flop is well suited for TR based on its reliable performance. In order to achieve high efficiency, the supply voltage should be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 5.2mA. It has 6lines.
SN74HC174PWRG4 Features
Tape & Reel (TR) package
74HC series
16 pins
6 Bits
SN74HC174PWRG4 Applications
There are a lot of Texas Instruments SN74HC174PWRG4 Flip Flops applications.
- Storage registers
- Patented noise
- Differential Individual
- Power down protection
- Matched Rise and Fall
- Test & Measurement
- 2 – Bit synchronous counter
- ESD protection
- Computers
- Latch-up performance
