SN74AS825ADWRG4 Overview
The item is packaged in 24-SOIC (0.295, 7.50mm Width)cases. The package Tape & Reel (TR)contains it. The output it is configured with uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. In this case, the operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74ASseries contain this type of chip. A total of 1elements are contained within it. This process consumes 73mA quiescents. The number of terminations is 24. The 74AS825family includes it. The D flip flop is powered by a voltage of 5V . A device of this type belongs to the family of AS. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 24. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. Flip flops designed with 8bits are used in this part. There is a 5.5Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 4.5V. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch runs on a voltage of 5V volts. The D flip flop has no ports embedded. It operates with 8 output lines. Furthermore, it has WITH TRIPLE OUTPUT ENABLE; WITH CLEAR AND CLOCK ENABLEas a characteristic.
SN74AS825ADWRG4 Features
Tape & Reel (TR) package
74AS series
24 pins
8 Bits
5V power supplies
SN74AS825ADWRG4 Applications
There are a lot of Texas Instruments SN74AS825ADWRG4 Flip Flops applications.
- High Performance Logic for test systems
- Dynamic threshold performance
- Cold spare funcion
- Supports Live Insertion
- Clock pulse
- Registers
- Single Down Count-Control Line
- Individual Asynchronous Resets
- Control circuits
- QML qualified product
