SN74AS874DWR Overview
The item is packaged in 24-SOIC (0.295, 7.50mm Width)cases. The Tape & Reel (TR)package contains it. In the configuration, Tri-State, Non-Invertedis used as the output. JK flip flop uses Positive Edgeas the trigger. Surface Mountis positioned in the way of this electronic part. A 4.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is 0°C~70°C TA. The type of this D latch is D-Type. JK flip flop belongs to the 74ASseries of FPGAs. There should be no greater frequency than 125MHzon its output. A total of 2 elements are present. There is 133mA quiescent consumption. A total of 24terminations have been recorded. The 74AS874family includes it. Power is supplied from a voltage of 5V volts. It is a member of the ASfamily of D flip flop. There is an electronic component mounted in the way of Surface Mount. The 24pins are designed into the board. This device has the clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. It operates from 5V power supplies. The D flip flop is embedded with 2ports. This T flip flop features a maximum design flexibility due to its output current of 48mA. To operate, the chip has a total of 1 output lines. As an additional reference, you may refer to electronic flip flop WITH CLEAR.
SN74AS874DWR Features
Tape & Reel (TR) package
74AS series
24 pins
5V power supplies
SN74AS874DWR Applications
There are a lot of Texas Instruments SN74AS874DWR Flip Flops applications.
- Dynamic threshold performance
- Synchronous counter
- Storage Registers
- Guaranteed simultaneous switching noise level
- Set-reset capability
- Computing
- Balanced 24 mA output drivers
- QML qualified product
- Buffered Clock
- Shift registers
