SN74AUC1G80DCKRG4 Overview

It is packaged in the way of 5-TSSOP, SC-70-5, SOT-353. As part of the package Tape & Reel (TR), it is embedded. This output is configured with Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 0.8V~2.7V. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74AUC series. In order for it to function properly, its output frequency should not exceed 275MHz. There is 10μA quiescent consumption. Terminations are 5. It is a member of the 74AUC1G80 family. It is powered by a voltage of 1.2V . The input capacitance of this T flip flop is 2.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family AUCcan be found here. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 5 pins. This device has Positive Edgeas its clock edge trigger type. It is included in FF/Latches. This flip flop is designed with 1 Bits. Vsup reaches its maximum value at 2.7V. A normal operating voltage (Vsup) should remain above 0.8V. Using 1 circuits, it is highly flexible. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR.

SN74AUC1G80DCKRG4 Features

Tape & Reel (TR) package
74AUC series
5 pins
1 Bits

SN74AUC1G80DCKRG4 Applications

There are a lot of Texas Instruments SN74AUC1G80DCKRG4 Flip Flops applications.

• ATE
• Patented noise
• Cold spare funcion
• Buffer registers
• Divide a clock signal by 2 or 4
• Automotive
• Guaranteed simultaneous switching noise level
• Instrumentation
• Dynamic threshold performance
• Pattern generators