SN74AUP1G74DCURG4 Overview
The package is in the form of 8-VFSOP (0.091, 2.30mm Width). As part of the package Tape & Reel (TR), it is embedded. It is configured with Differentialas an output. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 0.8V~3.6V. In the operating environment, the temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74AUP series. A frequency of 100MHzshould not be exceeded by its output. This process consumes 500nA quiescents. It has been determined that there have been 8 terminations. It is a member of the 74AUP1G74 family. It is powered from a supply voltage of 1.2V. There is 1.5pF input capacitance for this T flip flop. This D flip flop belongs to the family of AUP/ULP/V. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 8. This device has the clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. An electronic part designed with 1bits is used in this application. As soon as 3.6Vis reached, Vsup reaches its maximum value. The superior flexibility of this circuit is achieved by using 1 circuits. Considering the reliability of this T flip flop, it is well suited for TR. With an output current of 4mA, it is possible to design the device in any way you want.
SN74AUP1G74DCURG4 Features
Tape & Reel (TR) package
74AUP series
8 pins
1 Bits
SN74AUP1G74DCURG4 Applications
There are a lot of Texas Instruments SN74AUP1G74DCURG4 Flip Flops applications.
- Parallel data storage
- Functionally equivalent to the MC10/100EL29
- Latch
- Guaranteed simultaneous switching noise level
- Balanced 24 mA output drivers
- Load Control
- Single Up Count-Control Line
- Automotive
- Reduced system switching noise
- Memory
