SN74AUP1G79DBVR Overview

The package is in the form of SC-74A, SOT-753. As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Non-Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 0.8V~3.6V. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74AUPseries contain this type of chip. It should not exceed 266MHzin its output frequency. As a result, it consumes 500nA of quiescent current without being affected by external factors. A total of 5 terminations have been made. JK flip flop belongs to 74AUP1G79 family. The power source is powered by 1.2V. There is 1.5pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as AUP/ULP/V. It is mounted in the way of Surface Mount. There are 5pins on it. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. There are 1bits in this flip flop. It reaches 3.6Vwhen the maximum supply voltage (Vsup) is applied. The supply voltage (Vsup) should be kept above 0.8V for normal operation. Despite its superior flexibility, it relies on 1 circuits to achieve it. Considering its reliability, this T flip flop is well suited for TR. This T flip flop features a maximum design flexibility due to its output current of 4mA.

SN74AUP1G79DBVR Features

Tape & Reel (TR) package
74AUP series
5 pins
1 Bits

SN74AUP1G79DBVR Applications

There are a lot of Texas Instruments SN74AUP1G79DBVR Flip Flops applications.

• Circuit Design
• CMOS Process
• Automotive
• Asynchronous counter
• Memory
• Clock pulse
• Shift Registers
• Divide a clock signal by 2 or 4
• Consumer
• Synchronous counter