SN74AUP1G79YZPR Overview

The item is packaged in 5-XFBGA, DSBGAcases. It is contained within the Tape & Reel (TR)package. T flip flop uses Non-Invertedas the output. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 0.8V~3.6V. Currently, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74AUP series. Its output frequency should not exceed 266MHz. As a result, it consumes 500nA quiescent current and is not affected by external forces. A total of 5 terminations have been made. The 74AUP1G79 family contains it. A voltage of 1.2V is used to power it. Its input capacitance is 1.5pF farads. In this case, the D flip flop belongs to the AUP/ULP/Vfamily. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 5. This device has Positive Edgeas its clock edge trigger type. This device is part of the FF/Latchesbase part number family. It is designed with a number of bits of 1. The maximal supply voltage (Vsup) reaches 3.6V. Normally, the supply voltage (Vsup) should be kept above 0.8V. To achieve this superior flexibility, 1 circuits are used. As a result of its reliability, this D flip flop is ideally suited for TR. Featuring the maximum design flexibility, it has an output current of 4mA .

SN74AUP1G79YZPR Features

Tape & Reel (TR) package
74AUP series
5 pins
1 Bits

SN74AUP1G79YZPR Applications

There are a lot of Texas Instruments SN74AUP1G79YZPR Flip Flops applications.

• Storage Registers
• High Performance Logic for test systems
• Instrumentation
• Frequency division
• Single Down Count-Control Line
• Buffer registers
• Data storage
• Divide a clock signal by 2 or 4
• Reduced system switching noise
• Shift registers