SN74BCT29825DWRG4 Overview
In the form of 24-SOIC (0.295, 7.50mm Width), it has been packaged. Package Tape & Reel (TR)embeds it. As configured, the output uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. In this case, the operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74BCT series. You should not exceed 125MHzin its output frequency. In total, it contains 1 elements. There is 16mA quiescent consumption. It has been determined that there have been 24 terminations. It is a member of the 74BCT29825 family. Power is supplied from a voltage of 5V volts. There is 5pF input capacitance for this T flip flop. BCT/FBTis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. There are 24pins on it. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. Flip flops designed with 8bits are used in this part. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. An electrical current of 5V volts is applied to it. There are 2 ports embedded in the flip flops. Currently, there are 8 lines of input. Furthermore, it has WITH CLEAR AND CLOCK ENABLE; WITH TRIPLE OUTPUT ENABLEas a characteristic.
SN74BCT29825DWRG4 Features
Tape & Reel (TR) package
74BCT series
24 pins
8 Bits
5V power supplies
SN74BCT29825DWRG4 Applications
There are a lot of Texas Instruments SN74BCT29825DWRG4 Flip Flops applications.
- Latch-up performance
- ESD performance
- ATE
- QML qualified product
- Frequency division
- Synchronous counter
- Consumer
- EMI reduction circuitry
- Patented noise
- Data storage
