SY10EP31VKG-TR Overview
It is embeded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. It is contained within the Tape & Reel (TR)package. It is configured with Differentialas an output. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at -3.3V~-5Vvolts. In this case, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 10EP series. It should not exceed 3GHzin terms of its output frequency. A total of 1elements are contained within it. Despite external influences, it consumes 45mAof quiescent current. This D latch belongs to the family of 10EP31. Surface Mount mounts this electronic component. The electronic flip flop is designed with pins 8. This device exhibits a clock edge trigger type of Positive Edge. 1bits are used in its design. The superior flexibility of this product is achieved by using 1 circuits. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Currently, there are 1 input lines present. Despite external influences, it consumes 45mAof quiescent current. -50mAis set as the high level output current. There is 50mA output current at the low level. Ideally, the operating temperature should be lower than 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. The system operates with a minimum supply voltage of -2.97V. It supports a maximum supply voltage of 5.5V volts. The frequency can be set to 3GHz.
SY10EP31VKG-TR Features
Tape & Reel (TR) package
10EP series
8 pins
1 Bits
SY10EP31VKG-TR Applications
There are a lot of Microchip Technology SY10EP31VKG-TR Flip Flops applications.
- Synchronous counter
- Data storage
- Set-reset capability
- Latch-up performance
- Single Up Count-Control Line
- Differential Individual
- Cold spare funcion
- Frequency division
- 2 – Bit synchronous counter
- EMI reduction circuitry
