SN74BCT29843NT Overview

In the 24-DIP (0.300, 7.62mm) package, it can be found as an embedded module. Packaged in the way of Tube. In its configuration, Tri-State is used as the output. This electrical device has Logic type D-Type Transparent Latch. Through Hole is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. The temperature at which the machine is operating is 0°C~70°C. There are a number of FPGAs in this series, including this one. With this electronic part, there are 9 bits. As far as this device is concerned, it has no terminations. The family it belongs to is 74BCT29843. The device works with a voltage of 5V for its supply voltage. It is equipped with 20 pin count. There is a device in this electronic family called BCT/FBT. There are 24 pins on it. A Through Hole mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. Vsup reaches 5.5V as the maximum supply voltage. A total of 5V power supplies are needed to run it. It is recommended to have a higher supply voltage (Vsup) than 4.5V. There are also other characteristics of it, such as WITH CLEAR AND PRESET. Maximum power supply (ICC) for its operation is 35mA.

SN74BCT29843NT Features

24-DIP (0.300, 7.62mm) package
74BCT series
9 Bits
74BCT29843 family
20 pin count
24 pins
5V power supplies

SN74BCT29843NT Applications

There are a lot of Texas Instruments SN74BCT29843NT Latches applications.

• Parallel Input
• Flip-flops
• Automotive Body Electronics
• Motor Drives
• Ring counter
• Display driver
• Shift right with parallel loading
• Shift left with parallel loading
• Double bus register system
• Up/down difference counting