SN74F174ANSRE4 Overview
The flip flop is packaged in 16-SOIC (0.209, 5.30mm Width). D flip flop is included in the Tape & Reel (TR)package. The output it is configured with uses Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. 0°C~70°C TAis the operating temperature. This electronic flip flop is of type D-Type. The 74Fseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 140MHz. D latch consists of 1 elements. As a result, it consumes 45mA quiescent current and is not affected by external forces. There are 16 terminations,This D latch belongs to the family of 74F174. The D flip flop is powered by a voltage of 5V . In this case, the D flip flop belongs to the F/FASTfamily. It is mounted in the way of Surface Mount. This board is designed with 16pins on it. It has a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Flip flops designed with 6bits are used in this part. The superior flexibility is achieved through the use of 7 circuits. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. An electrical current of 5V volts is applied to it. The supply voltage should be maintained at 5V for high efficiency. With an output current of 20mA, it is possible to design the device in any way you want. There are 6 output lines in this JK flip flop.
SN74F174ANSRE4 Features
Tape & Reel (TR) package
74F series
16 pins
6 Bits
5V power supplies
SN74F174ANSRE4 Applications
There are a lot of Texas Instruments SN74F174ANSRE4 Flip Flops applications.
- Latch
- Guaranteed simultaneous switching noise level
- QML qualified product
- Data storage
- Dynamic threshold performance
- EMI reduction circuitry
- Common Clocks
- Safety Clamp
- Cold spare funcion
- Shift registers
