SN74HC273DWG4 Overview
The item is packaged in SOICcases. A total of 20 terminations have been made. A voltage of 5V is used to power it. An electronic device belonging to the family HC/UHcan be found here. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. 8bits are used in its design. Despite its superior flexibility, it relies on 8 circuits to achieve it. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TUBE. For high efficiency, the supply voltage should be set to 5V. In order to operate, the chip has 1 output lines. This input has 2lines. As an additional reference, you may refer to electronic flip flop DUMMY VAL. -5.2mAis set as the high level output current. There is no low level output current set at 5.2mA. Temperatures below 85°Care ideal for operating. Temperatures above -40°Cshould be used. The minimum voltage required for operation is 2V. 6Vis the maximum supply voltage supported by it. This can be achieved at a frequency of 60MHz. It uses the logic IC D FLIP-FLOP. There are 1 functions associated with the JK flip flop. 20pins are provided on the D latch. It features maximum design flexibility due to the 5.2mA output current.
SN74HC273DWG4 Features
20 pins
8 Bits
1 Functions
20 pin count
SN74HC273DWG4 Applications
There are a lot of Texas Instruments
SN74HC273DWG4 Flip Flops applications.
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
- Modulo – n – counter
