SN74LV374ATNSG4 Overview
It is packaged in the way of 20-SOIC (0.209, 5.30mm Width). The Tubepackage contains it. Tri-State, Non-Invertedis the output configured for it. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74LV series. A frequency of 150MHzshould be the maximum output frequency. D latch consists of 1 elements. As a result, it consumes 2μA of quiescent current without being affected by external factors. There are 20 terminations,The 74LV374 family contains this object. A voltage of 2.5V is used to power it. Its input capacitance is 4pFfarads. This D flip flop belongs to the family of LV/LV-A/LVX/H. Electronic part Surface Mountis mounted in the way. 20pins are included in its design. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. There are 8bits in this flip flop. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. The superior flexibility is achieved through the use of 8 circuits. A power supply of 3.3Vis required to operate it. There are 2 ports embedded in the flip flops. The 16mA output current allows it to be designed with the greatest amount of flexibility.
SN74LV374ATNSG4 Features
Tube package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV374ATNSG4 Applications
There are a lot of Texas Instruments SN74LV374ATNSG4 Flip Flops applications.
- Asynchronous counter
- Safety Clamp
- Instrumentation
- Event Detectors
- Common Clocks
- Consumer
- Buffered Clock
- Single Up Count-Control Line
- Individual Asynchronous Resets
- Data Synchronizers
