SN74HC393DBR Overview

This is a device supplied in the 14-SSOP (0.209, 5.30mm Width) package. There are 14terminations used for configuring it. The supply voltage of 5V permits it to operate with full flexibility. There are 2 terminations on the device. There are a total of 14 pins in all components. As a result, it is packaged as Cut Tape (CT). As part of the circuit, there are 14pins used to connect other components. It is mounted in the direction of [0]. The HC/UHfamily is derived from it. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. Binary Counteris selected as the logic type. In this case, the operating temperature should be set to -40°C~85°C. Having a mounting type of [0], it is suitable for installation. By providing the supply voltage of [0], it is capable of operating more reliably. The array stores 4bits in each element. The result may be yeswhen expressing the result in Pbfree code. There are more related parts under the 74HC393base part number. It is packed with [0]. The device operates on a supply voltage of [0]. There is 2V minimum supply voltage (Vsup) for this device. With a frequency of [0], it operates. It is possible to reach a maximum supply voltage of 6VV (Vsup).

SN74HC393DBR Features

Embedded in the 14-SSOP (0.209, 5.30mm Width) package
4 bits per element
Operating supply voltage of 5V
Frequency of 60MHz

SN74HC393DBR Applications

There are a lot of Texas Instruments
SN74HC393DBR Counters & Dividers applications.

• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications
• Clocks
• Up Counters
• Dual Up Counters